There’s some really good news for those of you who use this filter – read my Maytag Filter UKF8001 review below for more. . .
My review will tell you about important information for this filter, alternate part numbers and where to find a low-cost replacement.
GREAT NEWS FOR ALL OF YOU MAYTAG FILTER UKF8001 USERS
This Maytag water filter UKF8001 part number has recently become a lot shorter and it’s now much easier to remember – so ordering yourself a replacement is super-simple and easy.
- The previously-used “AXX” suffix has been dropped from the end of the part number and now the new filter number is simply the Maytag PUR UKF8001 filter (without the “AXX” on the end of the UKF8001) – how easy is that?
If you’re like me and either can’t or don’t want to remember long part numbers, you’ll be very happy now with the new, shorter Maytag filter UKF8001 part number. I know I am!
Sometimes the Maytag filter UKF8001 is also called the Maytag PUR UKF8001, but the only part of the designation that matters is the “UKF8001″ because they’re both exactly the same item.
WHY WAS THIS MAYTAG FILTER UKF8001 FILTER PART NUMBER SHORTENED?
Previously, all the different makes and models of refrigerators (including the Maytag branded fridges) that used the old UKF8001AXX part number added up to a fairly large number – over 120 to be accurate.
120+ different designations is a lot of different refrigerator filter part numbers to keep track of all the versions of the Maytag water filter UKF8001, I know I sure can’t do it.
As consumers, I know we’re all glad to have an easier part number for our Maytag PUR water filters. Simply having to remember the filter number as the Maytag filter UKF8001 is a lot easier to remember.
And. . .almost every one of the other water filter part numbers that were used for different refrigerator brands became completely obsolete when this cool, new Maytag refrigerator ice and water filter UKF8001 came into the market.
- This consolidation made life simple again – now for any Maytag that uses the UKF8001 designation, the PUR water filter UKF8001 is all you have to remember for any replacement of the following refrigerator filter part numbers:
WHAT FRIDGE BRANDS DOES THE NEW MAYTAG PUR UKF8001 FIT?
The old UKF8001AXX water filter and it’s new replacement, the Maytag refrigerator ice and water filter UKF8001 are both designed to fit Maytag, Kenmore, Jenn-Air and Amana refrigerators that use a water filter design which swings downward from the inside ceiling of the refrigerator.
- Make sure to replace your old UKF8001AXX or any of the other interchangeable part numbers with the new Maytag fridge water filter which uses the PUR water filter UKF8001 part number and you’ll have excellent drinking water quality.
WHAT TYPE OF CONTAMINANTS ARE REMOVED BY THE UKF8001AXX FILTER AND THE NEW MAYTAG FILTER UKF8001?
The Maytag PUR UKF8001 for your fridge removes undesirable substances as follows:
97.26% of Chlorine, 98.72% of Lindane, 99.99% of Cysts, 98.72% of Mercury, 98.68% of Class 1 Particulates, 97.09% of Turbidity, 92.97% of Toxaphene, 76.99% of Atrazine, 99.99% of Asbestos, 99.35% of Lead and 97.26% of Chlorine.
HERE ARE THE UKF8001 FILTER’S TECHNICAL SPECIFICATIONS
The Maytag refrigerator ice and water filter UKF8001 has a useful life of either 750 gallons or 6 months.
It’s rate of flow is 0.78 gpm and it has an operating pressure range of 35-125 pounds per square inch.
The PUR water filter UKF8001 is designed to operate normally between 33 and 100 degrees Fahrenheit. 0.5 microns is the filter’s micron rating.
The filter measures 8 inches in length and 2.25 inches in diameter. The UPC code for the UKF8001AXX PuriClean 2 version is 719881131429 and the filter is made in the United States.
This Maytag PUR filter UKF8001 is certified by the NSF – additionally, it retains beneficial fluoride in the water as it reduces various chlorine tastes and odors.
THIS MAYTAG FILTER UKF8001 REDUCES A LOT OF SUBSTANCES – DO I HAVE ALL OF THEM IN MY WATER?
It’s possible, but extremely unlikely since all water sources are inherently different from each other – the Maytag PUR UKF8001 will reduce any substances listed in the manufacturer’s specifications.
Even though both the old UKF8001AXX filter and the new updated Maytag water filter UKF8001 are highly capable refrigerator water filters, they will only remove listed substances as noted if they are actually present.
Your water may not necessarily have any particular combination of the filtered substances noted above.
To maintain a high level of ice and water quality as well as good, clean tasting water, you should change your Maytag water filter UKF8001 per the manufacturer’s instructions for optimal results ensuring clean and safe water.
- If you wait too long to change your filter, you and your family are drinking unfiltered and probably very dirty water. Something to think about. . .yuck!
Just click on the photo of the quantity you want below – you can clean up your water in no time (at a really low price from Amazon with free Super Saver Shipping on the 2-Pack and the 3-Pack!).
HOW DO I KNOW WHEN AND HOW TO CHANGE MY MAYTAG REFRIGERATOR WATER FILTER UKF8001?
There is generally an indicator light near the water dispensing station that will remind you to change your Maytag filter UKF8001.
It’s easy to change this Maytag filter, simply find the expired filter, twist it and then turn it until loose and pull it out so you can replace it with your new, fresh filter.
It’s generally a good idea to place a small bowl or folded kitchen towel under the filter to collect any stray water drops from the Maytag water filter UKF8001 that may drip inadvertently.
If you have any doubt about how long your UKF8001 has been in your refrigerator. . .don’t guess and risk your health – CHANGE IT, they’re cheap!
- A TIP FROM FORD MCCONNELL: Whenever you change your Maytag refrigerator water filter UKF8001, write the date on the outside of the filter with a “Sharpie” permanent marker so you’ll know when six months are up – then you’ll be sure to change your filter on time. . .every time!